Electronic Pulse Precision Metal Wood Bench Lathe 839 Turning Lathe 110V

  

1100W RC-210E Electronic Pulse Precision Metal Bench Lathe 8"39" Wood Lathe. Rotary diameter of tool rest.

Maximum stroke of tool rest plate. Maximum stroke of middle plate. Maximum stroke of bottom plate. Maximum stroke of tailstock sleeve. 57.9"18.5"20.1(147cm47cm51cm).

172.0LB(78kg)/238.1LB(108kg). The yellow on the lathe bed and chuck is antirust oil, Belong to normal phenomenon, which can be wiped off with oil or gasoline before use. Be sure to clean the anti-rust oil on the chuck before starting and turn the chuck by hand to prevent the chuck from jamming and causing the circuit board to burn out! This lathe can be used for turning end face, internal and external thread, Buddha beads, as well as drilling, chamfering, cutting and other processing. Can meet most of your DIY processing needs.

Switching between metric and imperial is no longer required by changing gears! Only need to operate through the panel, save a lot of time! Lower noise, no longer need to change gears to adjust the processing thread, only need to operate on the panel, processing efficiency greatly improved! Self-acting feed design solves many disadvantages of manual feeding, and can set self-acting feed speed through the panel, greatly improve the machining accuracy and efficiency.

Panel can observe the rotation speed in real time, which is convenient and flexible. The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools. The 8 screws allow you to better grip the tool and finish the machining efficiently. Precise metric are provided on the saddle handle, the tailstock handle and the movable center, allowing for more accurate and professional work.

Tailstock is movable and fixed, with a maximum center distance of 39.4 at the far right. With the MT#2 taper in tailstock spindle, this lathe is capable of adjusting set screws for accurate operation.

High-precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, We also offer optional four-jaw chucks. It can automatically switch between metric and inch systems without changing gears. In the X axis direction can be automatic feed, no manual; Automatic feed speed can be adjusted; Automatic feed range reached 0.01mm-0.4mm! There are three ways to start turning: manual start, automatic start, delay automatic start. Control panel set parameters after saving and start, can realize reciprocating turning function and turning thread.

Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details.

If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately.

Usually you will wait 5-7 days after checkout for it to clear.