G0752 10 x 22 Variable-Speed Lathe

  

A great benchtop metal lathe for turning tools and parts. The G0752 10" x 22" Variable-Speed Lathe should be a welcomed addition to your garage or workshop. A Delta variable-frequency driver inverter (VFD) ensures smooth, consistent torque at every speed from the 1 HP 3-phase motor without requiring a 3-phase power. The beds are constructed have been precision-ground and hardened in the traditional three-V prismatic design. The carriage has power feed capability when it is engaged with the lead screw.

The spindle has an MT#4 taper and 25mm bore. The tailstock quill offers 2-1/2 of travel and has a MT#3 taper. Cabinet Stands allow for a more organized and stable base for turning operations. The G0752 manual was written by our U.

Based Documentation Department and is packed with useful information. Motor: 1 HP, 110V, 3-phase (with inverter for single-phase power supply), 12A. Required power supply: 110V, single-phase, min.

Swing over cross slide: 6-1/8. Maximum tool bit size: 1/2. Leadscrew: 3/4 x 12 TPI. Longitudinal feeds: (9) 0.0025, 0.0140 in. Inch thread range: (31) 8-72 TPI.

Metric thread range: (26) 0.25-3.50mm. Overall dimensions: 50-1/2" W x 22" D x 19-5/8 H. Variable-speed spindle control with digital RPM readout. Chip tray and backsplash guard. 5 Three-jaw scroll chuck with two sets of jaws.

6-1/2 Four-jaw independent chuck with reversible jaws. MT#3 and MT#4 dead center.